| 66156L Franke Slewing Ring Bearings | Cage Type:Steel; Limiting Speed Rating (r/min):9500; B:23mm; Seals or Shields:Open Type; Clearance:C3; Reference Speed Rating (r/min):7000; d:40mm; Static Load Rating (kN):108; D:90mm; Weight:0.02 KGS; Availability:In Stock; SKU:21308ew/c3-skf; Dynamic Load Rating (kN):104; Fatigue Load Rating (kN):11.8; |
| 75075A Franke Slewing Ring Bearings | Initial grease fill:878.85 g; Cap bolt recommended tightening torque:203.4 N·m; Mass pillow block:117 kg; P180°:92.5 kN; da:180.975 mm; Appropriate attachment bolt size G:1 in; A1:171.45 mm; h:49.212 mm; Housing:SAF 040 KA; Eye bolt:2 x 3/8-16 UNC; P150°:77 kN; RG:3/4 NPT; H:360.363 mm; H2:69.85 mm; P90°:140 kN; Cap bolt:4 x 3/4-10 UNC; End plug (suffix Y):EPR 21; Labyrinth ring:2 x LOR 158; |
| 73035L Franke Slewing Ring Bearings | B:31 mm; N:12.3 mm; A1:15 mm; Recommended tightening torque for grub screw:4 N·m; T:37.3 mm; Da:50.8 mm; Basic dynamic load rating C:12.7 kN; Thread grub screw G2:M6x0.75; d:20 mm; Limiting speed:1800 r/min; Hexagonal key size for grub screw N:3 mm; B4:4.5 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A:29.5 mm; Housing material:Composite; Basic static load rating C0:6.55 kN; |
| 2 1225 Rollix Slewing Ring Bearings | RG:3/8 NPT; Initial grease fill:218.29 g; PG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; PosiTrac Plus contact element (db shaft position):B10724-89; Stabilizing ring:SR-17-14; P120°:31.6 kN; L:330.2 mm; da:85 mm; Cap bolt:2 x 5/8-11 UNC; Housing:SAF 217; J max.:279.4 mm; db:100.013 mm; H1:95.25 mm; A1:88.9 mm; P90°:50.7 kN; Mass pillow block:15.5 kg; |
| 75041A Franke Slewing Ring Bearings | d:90mm; Clearance:Standard; B:40mm; Weight:0.02 KGS; SKU:22218ek-qbl; D:160mm; Cage Type:Steel; Seals or Shields:Open Type; Availability:In Stock; |
| 28 0941 01 Rollix Slewing Ring Bearings | Weight:0.21 KGS; Seals or Shields:Two Rubber Seals; Limiting Speed Rating (r/min):9500; D:52mm; d:20mm; Dynamic Load Rating (kN):16; Cage Type:Steel; Availability:In Stock; Static Load Rating (kN):7.8; B:21mm; Clearance:Standard; SKU:62304-2rsr-fag; Fatigue Load Rating (kN):0.495; |
| 73033L Franke Slewing Ring Bearings | A2:315.119 mm; Eye bolt:2 x 1/2-13 UNC; A1:228.6 mm; H2:101.6 mm; Cap bolt recommended tightening torque:1017 N·m; h:73.025 mm; PosiTrac Plus contact element:2 x B10724-607; Cap bolt, SAE grade:5; P90°:271 kN; PG:1/4 NPT; J min.:666.75 mm; Ca:147.803 mm; P60°:449 kN; Mass pillow block:324 kg; Housing:SAF 056 KAUB; Da:419.999 mm; H:495.3 mm; Cap bolt:4 x 1 1/2-6 UNC; L:869.95 mm; P150°:151 kN; |
| 77202A Franke Slewing Ring Bearings | B:64mm; Weight:0.02 KGS; Dynamic Load Rating (kN):610; Static Load Rating (kN):630; SKU:22318-e1-fag; Fatigue Load Rating (kN):55; Clearance:Standard; Cage Type:Steel; d:90mm; Limiting Speed Rating (r/min):3600; Reference Speed Rating (r/min):3000; Availability:In Stock; D:190mm; Seals or Shields:Open Type; |
| 73111L Franke Slewing Ring Bearings | da:76.2 mm; P120°:31.6 kN; R1:53.975 mm; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; End plug (suffix Y):EPR 9; PosiTrac Plus contact element:2 x B10724-53; Max. speed for PosiTrac Plus seal:1950 r/min; h:34.925 mm; H2:38.1 mm; Labyrinth ring:2 x LOR 54; Ca:45.796 mm; Housing:FSAFS 517; RG:3/8 NPT; H1:95.25 mm; Initial grease fill:110.56 g; S:4.763 mm; P180°:33.8 kN; Cap bolt, SAE grade:8; Stabilizing ring:SR-17-14; |
| 7 1606 02 Rollix Slewing Ring Bearings | SKU:1315k/c3-qbl; Seals or Shields:Open Type; B:37mm; Clearance:C3; Cage Type:Steel; d:75mm; D:160mm; Availability:In Stock; Weight:0.02 KGS; |
| 73040L Franke Slewing Ring Bearings | Availability:In Stock; Fatigue Load Rating (kN):4.15; Weight:0.43 KGS; d:40mm; Seals or Shields:Open Type; B:18mm; SKU:bsa208cga-skf; Static Load Rating (kN):112; Oil Limiting Speed (r/min):7500; Clearance:Standard; Cage Type:Plastic; Dynamic Load Rating (kN):42.5; D:80mm; Grease Limiting Speed (r/min):6300; |
| 73004L Franke Slewing Ring Bearings | A2:379.425 mm; Da:419.999 mm; h:73.025 mm; Pa:89 kN; Stabilizing ring:2 x A8819; H2:101.6 mm; P180°:267 kN; Initial grease fill:3515.4 g; R1:163.512 mm; PG:1/4 NPT; P90°:400 kN; Max. speed for Taconite seal:310 r/min; Taconite seal:TER 606; Cap bolt, SAE grade:8; RG:1 NPT; Ca:147.803 mm; da:265.113 mm; Housing:SSAFS 056 KAUA; Mass pillow block:392 kg; End plug (suffix Y):X-5217-2; |