| 73016L Franke Slewing Ring Bearings | Seals or Shields:Two Rubber Seals; Availability:In Stock; Clearance:Standard; SKU:2308-2rs-tvh-fag; B:33mm; Weight:1.01 KGS; D:90mm; Static Load Rating (kN):9.6; d:40mm; Fatigue Load Rating (kN):0.6; Cage Type:Plastic; Limiting Speed Rating (r/min):5300; Dynamic Load Rating (kN):30; |
| 7 1385 03 Rollix Slewing Ring Bearings | Cage Type:Plastic; SKU:3214b-2rstnc3-qbl; Seals or Shields:Two Rubber Seals; Availability:In Stock; B:39.7mm; d:70mm; D:125mm; Clearance:C3; Weight:0.02 KGS; |
| 2 1225 Rollix Slewing Ring Bearings | RG:3/8 NPT; Initial grease fill:218.29 g; PG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; PosiTrac Plus contact element (db shaft position):B10724-89; Stabilizing ring:SR-17-14; P120°:31.6 kN; L:330.2 mm; da:85 mm; Cap bolt:2 x 5/8-11 UNC; Housing:SAF 217; J max.:279.4 mm; db:100.013 mm; H1:95.25 mm; A1:88.9 mm; P90°:50.7 kN; Mass pillow block:15.5 kg; |
| 75075A Franke Slewing Ring Bearings | Initial grease fill:878.85 g; Cap bolt recommended tightening torque:203.4 N·m; Mass pillow block:117 kg; P180°:92.5 kN; da:180.975 mm; Appropriate attachment bolt size G:1 in; A1:171.45 mm; h:49.212 mm; Housing:SAF 040 KA; Eye bolt:2 x 3/8-16 UNC; P150°:77 kN; RG:3/4 NPT; H:360.363 mm; H2:69.85 mm; P90°:140 kN; Cap bolt:4 x 3/4-10 UNC; End plug (suffix Y):EPR 21; Labyrinth ring:2 x LOR 158; |
| 7 24 Rollix Slewing Ring Bearings | Mass housing washer:0.56 kg; r1,2 min.:1.1 mm; D:115 mm; B:10.5 mm; D1:67 mm; |
| 23 1091 01 Rollix Slewing Ring Bearings | d:40.000 mm; D:68.0000 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:20800 N; Basic Static Radial Load Rating Co:11600 N; B:15.00 mm; Grease Speed Rating Open/Shielded n1:9500 rpm; Oil Speed Rating Open/Shielded n2:12000 rpm; Sealed Speed Rating n3:6300 rpm; Fillet Radius ra:1.00 mm; |
| 73124L Franke Slewing Ring Bearings | r3,4 min.:3.3 mm; Basic static load rating C0:7100 kN; Calculation factor Y2:2.1; D1 ≈:417 mm; Basic dynamic load rating C:3600 kN; B:254 mm; r1,2 min.:1 mm; Fatigue load limit Pu:600 kN; D:457.098 mm; Comparative radial load rating CF:765 kN; d1 ≈:365 mm; Comparative axial load rating CFa:179 kN; d:343.052 mm; Calculation factor Y1:1.4; Thrust factor K:1.23; Calculation factor e:0.48; |
| 66386L Franke Slewing Ring Bearings | Clearance:C3; Cage Type:Plastic; Availability:In Stock; D:85mm; B:30.2mm; Dynamic Load Rating (kN):49.5; d:45mm; Oil Limiting Speed (r/min):6700; Weight:0.62 KGS; Seals or Shields:Open Type; Grease Limiting Speed (r/min):5000; SKU:5209tnc3-nsk; Static Load Rating (kN):38; |
| 6 2500 01 Rollix Slewing Ring Bearings | Preload class C GC:100 N; Attainable speed for grease lubrication:36000 r/min; Calculation factor f:1.07; Reference grease quantity Gref:0.54 cm³; d:25 mm; Static axial stiffness, preload class A:24 N/µm; d2:30.6 mm; Number of balls z:18; Calculation factor fHC:1; Preload class B GB:50 N; Static axial stiffness, preload class C:44 N/µm; d1:30.6 mm; Fatigue load limit Pu:0.17 kN; Static axial stiffness, preload class B:32 N/µm; |
| 7 1830 04 Rollix Slewing Ring Bearings | h:60.325 mm; Taconite seal:TER 146; PG:1/4 NPT; da:160.338 mm; P90°:320 kN; End plug (suffix Y):EPR 19; ba:75.406 mm; Da:319.999 mm; Cap bolt recommended tightening torque:1220 N·m; H2:76.2 mm; A1:180.975 mm; P60°:535 kN; P180°:202 kN; H:377.825 mm; L:679.45 mm; H1:190.5 mm; RG:3/4 NPT; P120°:196 kN; Pa:46.3 kN; Housing:SSAFS 536; |
| 75033A Franke Slewing Ring Bearings | Cage Type:Steel; Oil Limiting Speed (r/min):2800; Seals or Shields:Open Type; Grease Limiting Speed (r/min):1800; Static Load Rating (kN):202; B:31mm; d:50mm; D:95mm; SKU:51310-nsk; Clearance:Standard; Dynamic Load Rating (kN):97.5; Availability:In Stock; Weight:0.93 KGS; |
| 68472A Franke Slewing Ring Bearings | Clearance:Standard; Oil Limiting Speed (r/min):3600; B:45mm; D:200mm; Dynamic Load Rating (kN):153; Cage Type:Steel; Weight:5.76 KGS; Grease Limiting Speed (r/min):3000; Seals or Shields:Single Metal Shield; Availability:In Stock; SKU:6319z-nsk; Static Load Rating (kN):119; d:95mm; |